Butt Weld Long Stub End

Butt Weld Long Stub End Manufacturers & suppliers in India

Stainless Steel Butt Weld Long Stub End Suppliers, butt weld Short Stubend, SS Long Stub End, aluminum Lap Joint Stub Ends & buttweld fittings manufacturer

Butt Weld Long Stub End, Stub End, Lap Joint Stub Ends, Long Stub End, Short Stubend Stockholders

original photograph of Butt Weld Long Stub End in our factory

Dynamic Forge & Fittings manufacturing unit- original photograph of Butt Weld Long Stub End

Dynamic Forge & Fittings was the first company in India who was awarded the order to Supply Stainless Steel Forged Fittings & Butt Weld Long Stub End by Indian Oil Corporation for their refinery at Mundra. In 2008 Jordan Petroleum Refinery Company Limited selected Dynamic Forge & Fittings to supply stainless steel butt weld fittings & alloy steel forged fittings to Amman, Jordan out of  6 top manufacturers of forged fittings in INDIA based on pressure rating of our forged fittings.

Dynamic Forge & Fittings (I) Pvt. Ltd. is an approved manufacturer of high nickel based special alloy buttweld pipe fittings and Butt Weld Long Stub End, Carbon Steel, Alloy Steel ASME B16.25, ANSI B19.28, MSS-SP-43 Lap Joint Stub End, Fittings Lap Joint Stub End, stainless pipe fittings, seam welded 100% radiography tested pipe fittings to requirements of BVIS, IBR, BARC, DNV, BHEL & we are ISO 9001:2008, 14001:2004, OHSAS 18001:2007 certified company.

Dynamic Forge & Fittings manufacturing unit's original photograph

Dynamic Forge & Fittings manufacturing unit’s original photograph

Contents:

 

 

Butt Weld Long Stub End Material, Size & Specification

Butt Weld Long Stub End, Lap Joint Stub Ends, Long Stub End, Short Stubend

Type Butt weld (BW)
Butt weld (BW) Standard ASME / ANSI – B 16.9
ASTM A403 – ASME SA403 – ‘Standard Specification for Wrought Austenitic   Stainless Steel Piping Fittings’
API 590-605
ASME B16.9 – ‘Factory-Made Wrought Buttwelding Fittings’
ASME B16.25 – ‘Buttwelding Ends’
ASME B16.28 – ‘Wrought Steel Buttwelding Short Radius Elbows and   Returns’
MSS SP-43 – ‘Wrought and Fabricated Butt-Welding Fittings for Low   Pressure, Corrosion Resistant Applications’
Butt Weld Long Stub End Dimension ANSI B16.9, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS   B2312, JIS B2313
Butt Weld Long Stub End Size 1/2” TO 36”, (Seamless Butt weld up to 24”), (Welded Butt weld 8” TO 36”)
Butt Weld Long Stub End Thickness SCH: 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS, Custom Thickness.
Butt weld fittings Range Elbow, Tee, Reducer, Stubend, Cross, Pipe Cap, Pipe Bend
Stainless Steel Butt Weld Long Stub End ASTM A403 WP316/316L
ASTM A403 WP304/304L
ASTM A182 F316L, 304L
DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
Duplex Steel Butt Weld Long Stub End ASTM A815, ASME SA815 UNS No S31803, S32205
ASTM A815, ASME SA815 UNS No S32750, S32950
Carbon Steel Butt Weld Long Stub End ASTM A234 Gr. WPB
ASTM A420 Gr. WPL6
ASTM A105
ASTM A350 Gr. LF2
ASTM A234 Gr WPB ST37.2, ST35
ASTM / ASME A/SA 234 / 420 WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70
Low Temperature Butt Weld Long Stub End ASTM A420 WPL3, A420 WPL6
Alloy Steel Butt Weld Long Stub End ASTM A 234 WP – P5, P9, P11, P12, P21, P22 & P91
ASTM A234 wp1 / wp5 / wp9 / wp11 / wp22 / wp91
Copper Alloys Butt Weld Long Stub End ASTM / ASME SB 111 UNS NO. C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200, C 70600 C 71500
ASTM / ASME SB 466 UNS NO. C 70600 (CU -NI- 90/10) , C 71500 (CU -NI- 70/30)
Copper Nickel 
Cupro-Nickel 90/10
Cupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.
Nickel Alloy Butt Weld Long Stub End ASTM / ASME SB 366, ASTM / ASME SB 564, Inconel 600 – UNS N06600, Inconel 601 – UNS N06601, Inconel 625 – UNS N06625, Incoloy 800 – UNS N08800, Incoloy 800H / HT – UNS N08810, Incoloy 825 – UNS N08825

Fittings

  • A234 = This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction.
  • A420 = Standard specification for piping fittings of wrought carbon steel and alloy steel for low-temperature service.
  • A403 = Standard specification for wrought austenitic stainless steel piping fittings.

Butt Weld Long Stub End Dimensions

Butt Weld Long Stub End Dimensions

Product Nom. Pipe Size Dia (G) Length (F), Short Outside Dia (O.D.) Radius (A), A Schedule 160, Approx. Weight Sch 160, Inside Dia (I.D.) Sch 160, Lap Thickness (t) Schedule 160, Wall Thickness (T) XX Strong Wall Approx. Weight XX Strong Wall, Inside Dia (I.D.) XX Strong Wall, Lap Thk (t) XX Strong Wall, Wall Thickness (T)
1 1/2" Lap- Joint Stub End / Stub Ends Long Type "A 1.5 2.875 2 1.9 0.25 2.08 1.338 0.281 0.281 2.98 1.1 0.4 0.4
1 1/2" Lap- Joint Stub End / Stub Ends Long Type "A" 1.5 2.875 4 1.9 1.2 1.61 0.15 0.15 1.49 1.5 0.2 0.2
1 1/4" Lap- Joint Stub End / Stub Ends Long Type "A 1.25 2.5 2 1.66 0.1875 1.64 1.16 0.25 0.25 2.52 0.896 0.382 0.382
1 1/4" Lap- Joint Stub End / Stub Ends Long Type "A" 1.25 2.5 4 1.66 0.97 1.38 0.14 0.14 1.26 1.278 0.191 0.191
1" Lap- Joint Stub End / Stub Ends Long Type "A 1 2 2 1.315 0.125 1.22 0.815 0.25 0.25 1.76 0.599 0.358 0.358
1" Lap- Joint Stub End / Stub Ends Long Type "A" 1 2 4 1.315 0.68 1.049 0.133 0.133 0.88 0.957 0.179 0.179
1/2" Lap- Joint Stub End / Stub Ends Long Type "A 0.5 1.375 2 0.84 0.125 0.43 0.464 0.187 0.188 0.68 0.252 0.294 0.294
1/2" Lap- Joint Stub End / Stub Ends Long Type "A" 0.5 1.375 3 0.84 0.26 0.622 0.109 0.109 0.34 0.546 0.147 0.147
10" Lap- Joint Stub End / Stub Ends Long Type "A 10 12.75 5 10.75 0.5 121.5 8.5 1.125 1.125
10" Lap- Joint Stub End / Stub Ends Long Type "A" 10 12.75 10 10.75 39.5 10.02 0.365 0.365 54 9.75 0.5 0.5
12" Lap- Joint Stub End / Stub Ends Long Type "A 12 15 6 12.75 0.5 169 10.126 1.312 1.312
12" Lap- Joint Stub End / Stub Ends Long Type "A" 12 15 10 12.75 48.5 12 0.375 0.375 64.5 11.75 0.5 0.5
14" Lap- Joint Stub End / Stub Ends Long Type "A" 14 16.25 12 14 63 13.25 0.375 0.375 84 13 0.5 0.5
16" Lap- Joint Stub End / Stub Ends Long Type "A" 16 18.5 12 16 73.5 15.25 0.375 0.375 98 15 0.5 0.5
18" Lap- Joint Stub End / Stub Ends Long Type "A" 18 21 12 18 99 17.25 0.375 0.375 136 17 0.5 0.5
2 1/2" Lap- Joint Stub End / Stub Ends Long Type "A 2.5 4.125 2.5 2.875 0.3125 5.94 2.125 0.375 0.375 8.8 1.771 0.552 0.552
2 1/2" Lap- Joint Stub End / Stub Ends Long Type "A" 2.5 4.125 6 2.875 3.4 2.469 0.203 0.203 4.4 2.323 0.276 0.276
2" Lap- Joint Stub End / Stub Ends Long Type "A 2 3.625 2.5 2.375 0.3125 4.79 1.689 0.343 0.343 6.1 1.503 0.436 0.436
2" Lap- Joint Stub End / Stub Ends Long Type "A" 2 3.625 6 2.375 2.25 2.067 0.154 0.154 3.05 1.939 0.218 0.218
20" Lap- Joint Stub End / Stub Ends Long Type "A" 20 23 12 20 108 19.25 0.375 0.375 157 19 0.5 0.5
3 1/2" Lap- Joint Stub End / Stub Ends Long Type "A 3.5 5.5 3 4 0.375 15.5 2.728 0.636 0.636
3 1/2" Lap- Joint Stub End / Stub Ends Long Type "A" 3.5 5.5 6 4 5.89 3.548 0.226 0.226 7.75 3.364 0.318 0.318
3" Lap- Joint Stub End / Stub Ends Long Type "A 3 5 2.5 3.5 0.375 7.1 2.624 0.438 0.438 9.8 2.3 0.6 0.6
3" Lap- Joint Stub End / Stub Ends Long Type "A" 3 5 6 3.5 4.65 3.068 0.216 0.216 6.5 2.9 0.3 0.3
3/4" Lap- Joint Stub End / Stub Ends Long Type "A 0.75 1.688 2 1.05 0.125 0.66 0.612 0.218 0.219 0.94 0.434 0.308 0.308
3/4" Lap- Joint Stub End / Stub Ends Long Type "A" 0.75 1.688 3 1.05 0.36 0.824 0.113 0.113 0.47 0.742 0.154 0.154
4" Lap- Joint Stub End / Stub Ends Long Type "A 4 6.188 3 4.5 0.4375 15.15 3.438 0.531 0.531 19.3 3.152 0.674 0.674
4" Lap- Joint Stub End / Stub Ends Long Type "A" 4 6.188 6 4.5 6.83 4.026 0.237 0.237 9.65 3.826 0.337 0.337
5" Lap- Joint Stub End / Stub Ends Long Type "A 5 7.313 3 5.563 0.4375 27.1 4.313 0.625 0.625 32.66 4.063 0.75 0.75
5" Lap- Joint Stub End / Stub Ends Long Type "A" 5 7.313 8 5.563 11.88 5.047 0.258 0.258 16.33 4.813 0.375 0.375
6" Lap- Joint Stub End / Stub Ends Long Type "A 6 8.5 3.5 6.625 0.5 37.56 5.187 0.718 0.719 45.26 4.897 0.864 0.864
6" Lap- Joint Stub End / Stub Ends Long Type "A" 6 8.5 8 6.625 15.18 6.065 0.28 0.28 22.63 5.761 0.432 0.432
8" Lap- Joint Stub End / Stub Ends Long Type "A 8 10.625 4 8.625 0.5 61.75 6.813 0.906 0.906 59.71 6.875 0.875 0.875
8" Lap- Joint Stub End / Stub Ends Long Type "A" 8 10.625 8 8.625 23.81 7.981 0.322 0.322 34.12 7.625 0.5 0.5

STUB ENDS – Ansi and MSS SP-43 dimensions

STUB ENDS – ANSI B 16.9 and MSS SP-43 dimension

inches ND mm Diameter of lap

Radius of fillet

Length F

 D

G R R1 MSS SP43 ANSI B16.9
1/2 15 21,34 34,92 3,17 0,80 50,80 76,20
3/4 20 26,67 42,86 3,17 0,80 50,80 76,20
1 25 33,40 50,80 3,17 0,80 50,80 101,60
1 1/4 32 42,16 63,50 4,76 0,80 50,80 101,60
1 1/2 40 48,26 73,00 6,35 0,80 50,80 101,60
2 50 60,32 92,10 7,93 0,80 63,50 152,40
2 1/2 65 73,02 104,80 7,93 0,80 63,50 152,40
3 80 88,90 127,00 9,52 0,80 63,50 152,40
3 1/2 90 101,60 139,70 9,52 0,80 76,20 152,40
4 100 114,30 157,20 11,11 0,80 76,20 152,40
5 125 141,30 185,70 11,11 1,58 76,20 203,20
6 150 168,27 215,90 12,70 1,58 88,90 203,20
8 200 219,07 269,80 12,70 1,58 101,60 203,20
10 250 273,05 323,80 12,70 1,58 127,00 254,00
12 300 323,85 381,00 12,70 1,58 152,40 254,00
14 350 355,60 412,70 12,70 1,58 152,40 304,80
16 400 406,40 469,90 12,70 1,58 152,40 304,80
18 450 457,20 533,40 12,70 1,58 152,40 304,80
20 500 508,00 584,20 12,70 1,58 152,40 304,80
22 550 558,80 641,30 12,70 1,58 152,40 304,80
24 600 609,60 692,10 12,70 1,58 152,40 304,80
The lap thickness T shall not be less than nominal pipe wall thickness t
STUB ENDS – ANSI 16.9 TOLERANCES

DIMENSIONAL TOLERANCES – STUB ENDS

For all fittings Stub Ends
Nominal Pipe Size (NPS) Outside Ø at Bevel Indide Ø at End Wall Thickness
t / t1
O.D. of Lap G Fillet Radius of Lap – R Overall Length. – F
1/2 a 2 1/2
1
0,8
Not
+0 -1
+0-1
2
3 a 3 1/2
1
1,6
less
+0 -1
+0-1
2
4
+2 -1
1,6
than
+0 -1
+0 -2
2
5 a 6
+3 -1
1,6
87,50%
+0-1
+0 -2
2
8
2
1,6
of nominal
+0 -1
+0 -2
2
10
+4 -3
3,2
tickness
+0 -2
+0 -2
2
12 to 18
+4-3
3,2
+0 -2
+0-2
3
20 a 24
+6-5
4,8
+0 -2
+0 -2
3
26 a 30
+7 -5
4,8
32 a 48
+7 -5
4,8

STUB ENDS – WEIGHTS
NPS
inches
STUB ENDS
Sch.
5S
Sch.
10S
Sch.
40S
Sch.
80S
1/2
0.06
0.08
0.12
0.13
3/4
0.07
0.09
0.15
0.17
1
0.09
0.15
0.20
0.25
1 1/4
0.13
0.20
0.30
0.35
1 1/2
0.16
0.25
0.38
0.46
2
0.25
0.40
0.55
0.75
2 1/2
0.35
0.50
0.80
1.00
3
0.50
0.60
1.10
1.50
4
0.70
1.00
1.80
2.50
5
1.00
1.25
2.50
3.50
6
1.60
1.95
3.70
5.50
8
2.50
3.10
5.90
10.0
10
4.00
4.90
10.5
14.0
12
6.60
7.10
15.0
20.0
14
6.40
7.80
15.5
20.5
16
7.90
9.00
18.0
24.0
18
9.30
10.5
21.0
28.0
20
12.0
13.5
23.5
31.0
24
16.5
19.0
28.5
38.0
Approximate weights in kg, density 8 kg/dm3

STUB ENDS – End welding bevels

NOMINAL PIPE SIZE (Inches) NB OD THICKNESS SCH 10 SCH 20 SCH 30 SCH 40 SCH 80
1/2 15NB 21.30 1.65 2.11 __ 2.41 2.77 3.73
3/4 20NB 26.70 1.65 2.11 __ 2.41 2.87 3.91
1 25NB 33.40 1.65 2.77 __ 2.90 3.38 4.55
1 1/4 32NB 42.20 1.65 2.77 __ 2.97 3.56 4.85
1 1/2 40NB 48.30 1.65 2.77 __ 3.18 3.68 5.08
2 50NB 60.30 1.65 2.77 __ 3.18 3.91 5.54
2 1/2 65NB 73.00 2.11 3.05 __ 4.78 5.16 7.01
3 80NB 88.90 2.11 3.05 __ 4.78 5.49 7.62
3 1/2 90NB 101.60 2.11 3.05 __ 4.78 5.74 8.08
4 100NB 114.30 2.11 3.05 __ 4.78 6.02 8.56
5 125NB 141.30 2.77 3.40 __ __ 6.55 9.53
6 150NB 168.30 2.77 3.40 __ __ 7.11 10.97
8 200NB 219.10 2.77 3.76 6.35 7.04 8.18 12.70
10 250NB 273.00 3.40 4.19 6.35 7.80 9.27 15.09
12 300NB 323.80 3.96 4.57 6.35 8.38 10.31 17.48
14 350NB 355.60 3.96 6.35 7.92 9.53 11.13 19.05
16 400NB 406.40 4.19 6.35 7.92 9.53 12.7 21.44
18 450NB 457.00 4.19 6.35 7.92 11.13 14.27 23.83
20 500NB 508.00 4.78 6.35 9.53 12.70 15.09 26.19
22 550NB 559.00 4.78 6.35 9.53 12.70 __ 28.58
24 600NB 610.00 5.54 6.35 9.53 14.27 17.48 30.96

STUB ENDS SHORT LENGTH ASTM A403/A815 ASME B16.9

Facing: 125-250 RMS (smooth finish)

w = welded version
s = seamless execution

Nominal Schedule D t G F R. Max. kg / St.
1/2 " 10s 21.3 2.11 34.9 50.8 3.18 0.07 s
40s 2.77 0.09 s
3/4 " 10s 26.7 2.11 42.9 50.8 3.18 0.10 s
40s 2.87 0.12 s
1 " 10s 33.4 2.77 50.8 50.8 3.18 0.16 s / w
40s 3.38 0.17 s
1 1/4 " 10s 42.2 2.77 63.5 50.8 4.76 0.22 s
40s 3.56 0.25 s
1 1/2 " 10s 48.3 2.77 73.0 50.8 6.35 0.25 s / w
40s 3.68 0.31 s
2 " 10s 60.3 2.77 92.1 63.5 7.94 0.43 s / w
40s 3.91 0.61 s
2 1/2 " 10s 73.0 3.05 104.8 63.5 7.94 0.57 s / w
40s 5.16 0.80 s
3 " 10s 88.9 3.05 127.0 63.5 9.53 0.73 s / w
40s 5.49 1.13 s
4 " 10s 114.3 3.05 157.2 76.2 11.11 1.09 s / w
40s 6.02 1.87 s
5 " 10s 141.3 3.40 185.7 76.2 11.11 1.47 s / w
40s 6.55 2.28 s
6 " 10s 168.3 3.40 215.9 88.9 12.70 2.15 s / w
40s 7.11 3.57 s / w
8 " 10s 219.1 3.76 269.9 101.6 12.70 3.22 s / w
40s 8.18 6.07 s / w
10 " 10s 273.1 4.19 323.9 127.0 12.70 5.13 w
40s 9.27 10.07 w
12 " 10s 323.9 4.57 381.0 152.4 12.70 8.16 w
40s 9.53 14.29 w
14 " 10s 355.6 4.78 412.8 152.4 12.70 10.89 w
40s 9.53 17.15 w
16 " 10s 406.4 4.78 469.9 152.4 12.70 12.70 w
40s 9.53 20.41 w
18 " 10s 457.2 4.78 533.4 152.4 12.70 17.24 w
20 " 10s 508.0 5.54 584.2 152.4 12.70 21.77 w
24 " 10s 609.6 6.35 692.2 152.4 12.70 27.22 w

Butt Weld Long Stub End Project Reference List

Dynamic Forge & Fittings supplied Butt Weld Long Stub End in more then 37 countries in last 10 years

PROJECT NAME / CUSTOMER DYNAMIC FORGE & FITTINGS SUPPLIED GRADES LOCATION YEAR
INDORAMA BUTT WELD FITTINGS AND BRANCH OUTLETS BW – Butt Weld Long Stub End A105 – A350 LF2 – A106B- A333 GR6 – A234 WPB – A420 WPL6 – A182 F304L THE NETHERLANDS 2015
GAS AND CONDENSATE EXPORT SYSTEM BUTT WELD FITTINGS AND BRANCH OUTLETS BW – Butt Weld Long Stub End A182 F316L – A182F44
A182 F44 , A312S31254, A182 F316L,
A105.N, A105 HDG, A350 LF2, A106
Gr.B, A106 Gr.B HDG , A333 Gr.6, A234 WPB
KUWAIT 2015
GAS DEVELOPMENT PROJECT BUTT WELD FITTINGS, BRANCH OUTLETS INCOLOY 825 INDONESIA 2015
QUALITY STAMP TRADING -SAUDI ARAMCO BUTT WELD FITTINGS , BRANCH OUTLETS SW, Butt Weld Long Stub End A105, A105 GALV, A350 LF2, A182F304L,
A182F316L, A403 WP316L, A182F321,
A182F44, A182F5, CU90/10 UNS C70610
SAUDI ARABIA 2014-2015
REFINERY OFF GAS PROJECT BUTT WELD FITTINGS, BRANCH OUTLETS BW-THRD, NIP OUTLETS A105, A105 HDG A350 LF2, A182 F304/
304L, A182F316/316L, A182F11,
A105N, A106B, A234WPB, A333
BELGIUM 2014-2015
MA’ADEN WA’AD AL SHAMAL PHOSPHATE BUTT WELD FITTINGS AND BRANCH OUTLETS SW-BW A350LF2, F304L, F316L, F904L,
A182F60, ALLOY20
A105N, A106B, A234WPB,
SAUDI ARABIA 2014-2015
NORTH WEST REDWATER BUTT WELD FITTINGS SW & NPT A350LF2,A420WPL6,
A182F304L-F316L,WP304L,HAST,C276
CANADA 2014-2015
CANADA NWR PROJECT BUTT WELD FITTINGS , BRANCH OUTLETS SW & NPT, Butt Weld Long Stub End F304L/316L/317L/347H/321H
F11/F22/ UNS08825
CANADA 2014-2015
DENIZ 2 PROJECT BUTT WELD FITTINGS SW & NPT A 105, A105 GALVA, A350LF2, A333 Gr6,
A234WPB-A420WPL6, F304L, WP304L
AZERBAIJAN 2014
ADMA OPCO ABU DHABI BUTT WELD FITTINGS, BRANCH OUTLETS BW-THRD, LATERAL, OUTLETS A694 F52, A182F321, A182F316, A105.N,
A312TP316L, A312 TP321, A182 F53
SUPER DUPLEX
UAE 2014
SAUDI ARAMCO HOLLAND BUTT WELD FITTINGS CuNi 9010 SAUDI ARABIA 2014
MISSAN OIL Comp.PETROCHINA IRAQ API COUPLINGS L80 IRAQ 2014
SAUDI ARAMCO BUTT WELD FITTINGS, BRANCH OUTLETS BW-SW-THRD MONEL 400, A182 F5, A182F316L,
A182F304L, A105
SAUDI ARABIA 2014
OIL AND GAS INC BUTT WELD FITTINGS AND BRANCH OUTLETS BW, Butt Weld Long Stub End UNS NO 6625 BRAZIL 2014
SHIDDIRGANG PROJECT BUTT WELD FITTINGS, BRANCH OUTLETS BW-SW-THRD   BANGLADESH 2014
SAUDI ARABIAN MINING COMPANY BUTT WELD FITTINGS AND BRANCH OUTLETS SW – BW A105, A105 GALV, A350LF2A182F304L,
A182F316L
SAUDI ARABIA 2014
GAS TURBINE POWER PLANT PROJECT BUTT WELD FITTINGS AND BRANCH OUTLETS SW, Butt Weld Long Stub End A105, A182F316L IRAQ 2014
GRUPO CUNADO FORGED STEEL FITTINGS A105,A182F304L, A182F316L,F321, TURKEY 2013-2014
ALSTOM FORGED STEEL FITTINGS AND BRANCH OUTLETS A105, A182F304L, A182F316L

MOROCCO, SOUTH AFRICA

2010

Butt Weld Long Stub End Material of construction

Stainless Steel Butt Weld Long Stub End

Stainless Steel Butt Weld Long Stub End

Alloy Steel butt weld fittings

Alloy Steel Butt Weld Long Stub End

Carbon Steel Butt Weld Long Stub End

Carbon Steel Butt Weld Long Stub End

Duplex Steel Butt Weld Long Stub End

Duplex Steel Butt Weld Long Stub End

Equivalent Quality & Price with below Manufacturers of Butt Weld Long Stub End

pipe fittings/forged fittings dealer & distributor

Raccortubi S.p.A. Butt Weld Long Stub End, Italy

pipe fittings/forged fittings dealer & distributor

Erne Fittings Butt Weld Long Stub End, Austria

pipe fittings/forged fittings dealer & distributor

Melesi Butt Weld Long Stub End, Italy

pipe fittings/forged fittings dealer & distributor

Mega Butt Weld Long Stub End, Italy

pipe fittings/forged fittings dealer & distributor

Ulma Butt Weld Long Stub End, Spain

pipe fittings/forged fittings dealer & distributor

TecnoForge Butt Weld Long Stub End, Italy

pipe fittings/forged fittings dealer & distributor

BENKAN Corporation Butt Weld Long Stub End, Japan

pipe fittings/forged fittings dealer & distributor

BKL- Thai Benkan Butt Weld Long Stub End, Thailand

pipe fittings/forged fittings dealer & distributor

Lame S.r.l. Butt Weld Long Stub End, Italy

pipe fittings/forged fittings dealer & distributor

Metal far Butt Weld Long Stub End, Italy

We have our sales representative in Mumbai, Ahmedabad, Chennai, Delhi, Bangalore, Hyderabad, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri, Tamil Nadu, Maharashtra, Jaipur, Jabalpur, Vishakapatnam, Sholapur, Davangere, New Delhi, Kakinada, Belagavi, Udaipur, Guwahati, Ludhiana

A leading Butt Weld Long Stub End, stainless steel Butt Weld Long Stub End, steel Butt Weld Long Stub End, butt welding, carbon steel Butt Weld Long Stub End, Stainless Steel Lap Joint Stub End, ANSI/ASME B16.9 Lap Joint Stub End, Pipe Fitting Lap Joint Stub End manufacturer, stockholder & wholesaler in India